Damp-proofing fluid and tanking slurry for Builders/DIY
Freezteq damp-proofing system
We are now able to offer the Freezteq damp-course system and KA Tanking slurry both of which are easy to use and suitable for anyone with basic building skills.
Freezteq
DPC Rising Damp Treatment
Freezteq Frozen Damp Proof Course system provides a much more effective
rising damp treatment than an injected damp-proof course but without the
need for any extra equipment (injection pump) meaning a lower overall
plus an optional 30 year guarantee.
Top 10 Advantages of using FREEZTEQ frozen damp-proofing system
1. DIY or Contractor 2. Ease of Use 3. Guarantee 4. Most effective method 5. Direct insertion |
6. Reduced costs 7. All wall thickness 8. All types of stone and brickwork 9. Treatment from one side of wall only 10. No specialised equipment |
Full instructions are given with each box of FREEZTEQ. Basically, each
hole is drilled to within 25mm of the wall thickness. The frozen ice
stick of FREEZTEQ is then inserted into each pre-drilled hole.
Sufficient ice sticks must be used to fill each hole. The frozen
FREEZTEQ ice sticks then melt slowly and diffuses into the wall much
more effectively than an injected damp-proof course and provides an
effective damp-proof course. The process is repeated until all holes
have been filled. This is one application and once all sticks have
dissolved the process is repeated a further 3 times within a 24 hour
period to provide the best chemical damp-proof course available.
One box containing 250 prepacked 'ice sticks' will treat approx 7
metres of 225mm / 9" thick walling and the cost of a box of 250 Freezteq
ice sticks is £55.00.
Boxes of 100 Freezteq ice-sticks are £25.00 and 50 Freezteq ice-sticks
are £12.00
KA Tanking system
The complete crystalline solution to waterproofing masonry and
blockwork.
The KA Tanking Slurry waterproofing system provides a solution to water
leakage, ingress or seepage in concrete structures or any cementitious
substrate. The formation and development of insoluble crystals into
water bearing capillaries and fissures effectively blocks the further
passage of water and ensure permanent water tightness for the life of
the structure.
Areas of Use
KA Tanking Slurry can be applied to new or old structurally sound
surfaces. It can be applied to the negative or positive side and will
negate dampness in ground water permeation even under hydrostatic
pressure. It can be used for the following applications:
|
Advantages
|
Forest Dampbusters can deliver KA Tanking Slurry free of charge to your
house or building site and the cost per 25 kg bucket is £15.00.
Guaranteed cheapest prices in the Forest of Dean for KA tanking slurry.
To order any Freezteq or KA tanking Slurry please phone Forest
Dampbusters on 01594 837300.